Printer Support

If Printing is not good result do Maintenance Procedure if print results are blurred, colors are not printed correctly or print results are unsatisfactory, you can follow the maintenance guidelines below: Check if ink not empty on cartridge Print nozzle check pattern See the result of printing nozzle check pattern, if there are missing lines or horizontal white streaks in the pattern, do next step Clean the print head After cleaning print head, print and check the nozzle check pattern, if the problem is not resolved, do next step Deep cleaning print head After deep cleaning print head, print and check the nozzle check pattern, if the problem is not resolved, replace printer cartridge Performing Maintenance Functions from your Windows Computer Cleaning the print heads allow you to clear up clogged print head nozzle Deep Cleaning Deep cleaning is more thorough than cleaning. Perform deep cleaning when two Cleaning attempts not resolve the print head problem Cleaning the paper feed roller

  P erform the reset and check : Turn the printer on, if it is not already on.  Wait until the printer is idle and silent before you continue.  With the printer turned on, disconnect the power cord from the rear of the printer.  Unplug the power cord from the wall outlet.  Wait at least 60 seconds.  Plug the power cord back into the wall outlet.  Reconnect the power cord to the rear of the printer.  Turn on the printer, if it does not automatically turn on.  Wait until the printer is idle and silent before you proceed  update the Firmware :   Perform the clean reinstallation of Pre-installed HP drivers 1.       In Windows, search for and open Programs and features    2.       Select your HP Printer    3.       Select Uninstall    4.       In Windows, search for and open Devices and printers    5.       In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete’ or ‘Remove Device’    6.       Open up the run command with the “

  What to know: E1, E2, and E3 errors are some of the most common errors found on HP printers. Each error has its own steps to fix. Generally, errors on HP printers can be resolved by resetting the printer. Here’s how to solve the E1, E2, and E3 error on HP Printer ERROR CODE E1 The printer receiving a print job starts feeding the paper and detects that the paper width for the print job is greater than the width of the loaded paper. How To Fix E1 Error Press the Resume button or the Cancel button to cancel the print job and eject the paper. To avoid mismatched paper size problems, do one of the following before printing. Change the paper size setting when printing to suit the loaded paper. Remove all paper from the input tray, and then load paper that matches the paper size setting to be printed. ERROR CODE E2 The printer receives a one-page print job, detects that the paper length for the print job does not match the length of the paper loaded, and then prints the page with an error.

  Brother printer prints quality problem and its solution: No doubt, brother printers have different properties and capabilities, but there could be several problems that will arise that can affect its quality. To know about it in brief, you can read this full content. Here are a few brother printer printing quality issues, and its solutions are described in an effective way. Low-quality papers: Whenever you are going to print through your brother printer and if you are using low quality papers then it can cause a Brother Printer Print Quality Problems, because a low-quality paper may not be able to take the ink upon it or it may be stuck into your printing machine that can also cause a paper jam problem. Here are a few tips related to your paper that you should consider: Before buying a huge amount of papers, it tests its few sample papers. Use neutral papers instead of using alkaline papers. The papers you are going to use should be 75 to 90 gm2. Always use long grain papers. If you