How to fix HP Officejet Scanner problems?

 Perform the reset and check :

  1. Turn the printer on, if it is not already on. 

  2. Wait until the printer is idle and silent before you continue. 

  3. With the printer turned on, disconnect the power cord from the rear of the printer. 

  4. Unplug the power cord from the wall outlet. 

  5. Wait at least 60 seconds. 

  6. Plug the power cord back into the wall outlet. 

  7. Reconnect the power cord to the rear of the printer. 

  8. Turn on the printer, if it does not automatically turn on. 

  9. Wait until the printer is idle and silent before you proceed 

update the Firmware :

 

Perform the clean reinstallation of Pre-installed HP drivers


1.       In Windows, search for and open Programs and features   

2.       Select your HP Printer   

3.       Select Uninstall   

4.       In Windows, search for and open Devices and printers   

5.       In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete’ or ‘Remove Device’   

6.       Open up the run command with the “Windows key + R” key combo.   

7.       Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”)   

8.       Click on the “Drivers” tab   

9.       Look for HP Printer driver. If you see it Click on it and click Remove at the bottom   

10.   Select Ok   

11.   Select Apply and Ok on the Print Server Properties windows   

12.   Close Devices and Printers, restart the computer.


Call  +1-856-514-8666 for more help and support to fix HP Officejet 3830.

Comments

Post a Comment

Popular posts from this blog

How to troubleshoot HP printer?

HP printers are considered to be among the most reliable in the industry. But just as any other piece of IT equipment, they're vulnerable to failure. And it seems the newer printers can’t withstand the same amount of abuse that the older models could. Some solutions to fix HP Printer Problems : 1. Paper jams : Among the most common problems with any make of printer are paper jams. A printer will jam for any number of reasons: It’s dirty, the wrong paper type is being used, or the rollers on the printer that feed the paper through its pathway are worn down. While cleaning the printer periodically and using the correct paper type are easy fixes, roller replacement can be a difficult job depending on the model of HP printer. For some HP printers, the rollers are easily accessible, but you'll need to completely tear down other models to remove the rollers. Regardless of the cause, when removing a paper jam, always pull the paper in the direction of the paper path, because pulling i
Read more

Fix Epson Printer problem in Windows 10?

Image
  One of the more common problems faced by Windows 10 users is old software not working with the new operating system. Many Epson printer users have reported that their old printer doesn’t work after upgrading to Windows 10. Epson Stylus Photo R200 doesn’t work after Windows 10 upgrade One of the reasons the old Epson printer doesn’t work with Windows 10 is that the operating system tries to use old drivers and associated Epson packages from your previous installation. You need to uninstall the printer using the  Add/Remove programs  option. Also, remove any Epson related software package from your Windows 10 system. To be on safe side, check the  Device Manager  for any reference to Epson software by following the steps below: Go to  Desktop Click on the  Start Menu Type  device manager  in the  Search Box Click  Device Manager  from the list of search results In the  Device Manager  window, click  View  >  Show Hidden Devices Check for any Epson related entry and if found, delete
Read more

How to fix E1, E2 and E3 error in HP Printer?

  What to know: E1, E2, and E3 errors are some of the most common errors found on HP printers. Each error has its own steps to fix. Generally, errors on HP printers can be resolved by resetting the printer. Here’s how to solve the E1, E2, and E3 error on HP Printer ERROR CODE E1 The printer receiving a print job starts feeding the paper and detects that the paper width for the print job is greater than the width of the loaded paper. How To Fix E1 Error Press the Resume button or the Cancel button to cancel the print job and eject the paper. To avoid mismatched paper size problems, do one of the following before printing. Change the paper size setting when printing to suit the loaded paper. Remove all paper from the input tray, and then load paper that matches the paper size setting to be printed. ERROR CODE E2 The printer receives a one-page print job, detects that the paper length for the print job does not match the length of the paper loaded, and then prints the page with an error.
Read more